Prepare the Surface
Ensure the surface is clean, smooth, and dry.

1. Cut Out the Decal
   Carefully cut as close to the edges as possible using a sharp hobby knife.
2. Wet the Decal
   Dip the decal in water for 1 second or place a drop of water on it. Do not leave it floating. Wait for the decal to loosen from the backing paper.
3. Position the Decal
   Use a soft brush to slide the decal off the backing paper and onto the surface. Position, smooth out gently, and remove bubbles. Let it set; dab off excess water if needed.
4. (Optional) Apply Decal Softener
   Lightly brush on decal softener to help it conform to curves, edges, and textures. Avoid touching while it’s soft; allow to dry completely (at least 30 minutes). (e.g. Micro Set or Micro Sol all work well.)
5. Seal with Matte Varnish
   Once fully dry, apply a clear matte varnish to protect the decal and blend it into the surface.